|
 |
| Thermoforming Machine | Extruder |
|
S
p e c i f i c a t i o n s
|
|
| Material | HIPS |
| Production/hour | 60 to 80kg/hr |
| Film thickness range | 100 to 1000 MICRONS |
| Layflat tubing width | 800 mm |
| Power supply | 3 Phase, 415 V, 50Hz |
| Water consumption | 500 litter/hr |
| Air consumption | 5 Kg/cm |
|
S
c r e w (65 MM)
|
|
| Material | EN-41B, Stress Relieved, Gas Nitrided and Hard Chrome Plated |
| L/D Ratio | 26: 1 |
| Screw type | Barrier type with Maddock mixing zone |
|
B
a r r e l
|
|
| Material | EN-41B, Nitrided |
| Cooling arrangement | Blower cooling for zones 2 & 3 |
| No. Of zones | 4 zones (3 on extruder, 1 on adapter) |
| Heating system | Mica Band Heaters |
| HOPPER | Capacity – 50 kg. |
| MAIN DRIVE | 20 H.P. A.C. motor |
| GEAR BOX | Helical type with integral thrust bearing housing |
|
C
r o s s H e a d a n d D i e
|
|
| Die size | 200mm |
| Heating zone | 2 nos. |
| Air ring | Air ring made of Aluminium provided with 1 H.P. Blower |
|
T
a k e-O f f U n i t
|
|
| The take-off unit is fabricated of M.S. Profile having a total height of 12 fts. It | |
| has 2x 850mm nip rolls with manual clamping arrangement (1x Rubberized | |
| and 1x M.S.Hard-chrome plated) with bearing reduction gearbox, D.C. motor | |
| (1/2 H.P.) Flattening board and Irish ring |
|
C
o n t r o l P a n e l
|
|
| Consisting of 6x PID Temp. Controller, Ammetors, thermocouples, on/off | |
| switch for the entire cabinet, starter for the blower will be provided. D.C. | |
| Drive of ½ H.P. for Nip Roller And Winder. |
|
W
i n d e r
|
|
| 850mm surface winder consisting of Nip Roller with manual clamping | |
| arrangement (1x Rubberized and 1x M.S. Hard-chrome plated) D.C. | |
| motor and reduction gearbox. |
 |
||||
| Home | Profile | Products | Support | Contact Us |